[1]ZHAO G L,JIANG Y,HU X A,et al.High-temperature mechanical properties of nickel-based superalloys manufactured by additive manufacturing[J].Materials Science and Technology,2020,36(14):1523-1533.

[2]岳晓明,臧烁,赵永华,等.高品质超大深径比小孔电火花电解复合加工实验研究[J].机械工程学报,2024,60(9):374-382.YUE X M,ZANG S,ZHAO Y H,et al.Experimental study on highquality ultra-large depth-diameter ratio small-hole EDM electrolytic composite processing[J].Journal of Mechanical Engineering,2024,60(9):374-382.

[3]孙国荣.GH4169高温合金抽吸电极电解加工微小孔工艺研究[D].大连:大连理工大学,2021.SUN G R.Study on micro-hole electrolysis processing of GH4169superalloy suction electrode[D].Dalian:Dalian University of Technology,2021.

[4]DONG T,GAO C T,HOU H Z,et al.Effects of melt-pool geometry on microstructure structural damage behavior for single crystal superalloys in rapid solidification process[J].The International Journal of Fatigue,2018,111:345-355.

[5]CHU X Y,ZHUANG W H,XUE W D,et al.Electrolytic removal of recast layers on micro-EDM microstructure surfaces[J].The International Journal of Advanced Manufacturing Technology,2020,108:867-879.

[6]THAKUR S,JATINDER K,PRAKASH J M.Surface integrity analysis of machined surface of Ni-Ti shape memory alloy during wire spark erosion machining[J].Aircraft Engineering and Aerospace Technology,2023,95(2):225-236.

[7]徐正扬,张辰翔.基于电火花-电解复合加工方法的微小孔制造[J].航空制造技术,2018,61(3):16-22.XU Z Y,ZHANG C X.Manufacture of micropores based on EDM-electrolytic composite machining method[J].Aeronautical Manufacturing Technology,2018,61(3):16-22.

[8]DONGRE G,RAJURKAR A,GONDIL R,et al.Removal of surface spatter and recast layer by chemical cleaning[J].Materials Today:Proceedings,2019,18:4763-4772.

[9]MOHAMMADIAN N,TURENNE S,BRAILOVSKI V.Surface finish control of additively-manufactured Inconel 625 components using combined chemical-abrasive flow polishing[J].Journal of Materials Processing Technology,2017,252:728-738.

[10]TAN K L,YEO S H.Surface modification of additive manufactured components by ultrasonic cavitation abrasive finishing[J].Wear,2017,378/379:90-95.

[11]YU Z,ZUO D Y,SUN Y L,et al.Study on the improvement of the surface integrity and efficiency of electrical-discharge-machined TC4titanium alloy via abrasive flow machining[J].Proceedings of the Institution of Mechanical Engineers,Part B:Journal of Engineering Manufacture,2021,235(6/7):1197-1211.

[12]朱立,孙本良.钢材酸洗技术[M].北京:化学工业出版社,2007.ZHU L,SUN B L.Steel Pickling Technology[M].Beijing:Chemical Industry Press,2007.

[13]夏春阳,侯伟骜,杨文超,等.化学法去除热喷涂镍铬铝钇硅涂层的酸洗液成分和工艺研究[J].热喷涂技术,2024,16(2):106-112.XIA C Y,HOU W W,YANG W C,et al.Study on the composition and process of pickling solution for chemical removal of thermal sprayed nickel-chromium-aluminum-yttrium-silicon coatings[J].Thermal Spraying Technology,2024,16(2):106-112.

[14]马宁,张峻山.GH625镍基高温合金化学抛光工艺[J].电镀与涂饰,2024,43(4):79-86.MA N,ZHANG J S.Chemical polishing process of GH625 nickelbased high temperature alloy[J].Electroplating&Finishing,2024,43(4):79-86.

[15]王海林.冷轧不锈钢带钢酸洗的工艺与废气、废酸处理[J].中国冶金,2009,19(6):40-43.WANG H L.Pickling process of cold-rolled stainless steel strip and treatment of waste gas and waste acid[J].China Metallurgy,2009,19(6):40-43.

[16]李晓丹,李建中,倪家强,等.激光增材制造钛合金构件的化学抛光工艺研究[J].航空制造技术,2020,63(10):66-71.LI X D,LI J Z,NI J Q,et al.Study on chemical polishing process of laser additive manufacturing of titanium alloy components[J].Aeronautical Manufacturing Technology,2020,63(10):66-71.

[17]KLIUEV M,BOCCADORO M,PEREZ R,et al.EDM drilling and shaping of cooling holes in Inconel 718 turbine blades[J].Procedia CIRP,2016,42:322-327.

[18]PEI H Q,WANG J J,LI Z,et al.Oxidation behavior of recast layer of air-film hole machined by EDM technology of Ni-based single crystal blade and its effect on creep strength[J].Surface&Coatings Technology,2021,419:127285.

[19]迟长泰.镍基高温合金激光熔凝再铸层的选择性化学溶解机理研究[D].沈阳:东北大学,2015.CHI C T.Study on selective chemical dissolution mechanism of laser melting recasting layer of nickel-based superalloy[D].Shenyang:Northeastern University,2015.

[20]PENG J G,YANG Y,LI M C.Pickling behavior of 2205 duplex stainless steel hot-rolled strips in mixed solutions of HNO3-HF[J].Materials Research Express,2020,7(4):046502.