| 222 | 6 | 37 |
| 下载次数 | 被引频次 | 阅读次数 |
讲述了车灯镀铝和镀层性能测试的基本要求,对镀铝的缺陷类型进行分析,重点分析了注塑毛坯件缺陷、镀铝工序缺陷、包装与运输缺陷、试验件报废等4种情况,分享了部分对策。指出还应从灯具设计源头进行优化,尽量采用遮挡等方式掩盖镀铝缺陷,以减少镀铝件报废。
Abstract：The essential requirements for aluminizing car lamps and testing the properties of aluminum coatings were described. The defects of aluminum coating were analyzed, especially those resulted from injection molding, aluminizing, packaging, and transportation, as well as the discarding caused by testing were analyzed. Some countermeasures were presented. It was also pointed out that the designs of lamps should be optimized and the defects of aluminum coatings could be covered up to reduce the quantity of discarded parts.
[1]陶永亮.真空镀铝膜在汽车灯具上的应用[J].电镀与涂饰,2014,33(13):573-576.TAO Y L,Application of vacuum plated aluminum film to automotive lamps[J].Electroplating&Finishing,2014,33(13):573-576.
[2]陶永亮.汽车车灯造型的回顾与展望[J].汽车照明,2012(12):4-7.TAO Y L.History and prospect of vehicle lamp modeling[J].Auto Electric Parts,2012(12):4-7.
[3]李玉泉,孙小艾,潘宝荣,等.塑料在汽车照明灯具中的应用[J].化学世界,2000(增刊):188-189.LI Y Q,SUN X A,PAN B R,et al.Application of plastics to car lamps[J].Chemical World,2000(S1):188-189.
[4]白秀琴,李健,严新平,等.真空镀膜技术在塑料表面金属化上的应用[J].武汉理工大学学报(交通科学与工程版),2005,29 (6):947-950.BAI X Q,LI J,YAN X P,et al.Application of vacuum coating technology to metallization of plastics[J].Journal of Wuhan University of Technology(Transportation Science&Engineering),2005,29(6):947-950.
[5]黄鸿宏,黄洪填,黄剑彬,等.真空镀膜综述[J].现代涂料与涂装,2011,14(6):22-24.HUANG H H,HUANG H T,HUANG J B,et al.Summary of vacuum coating[J].Modern Paint and Finishing,2011,14(6):22-24.
[6]中华人民共和国工业和信息化部.洁净厂房设计规范:GB 50073-2013[S].北京:中国计划出版社,2013.Ministry of Industry and Information Technology of the People’s Republic of China.Code for Design of Clean Room:GB 50073-2013[S].Beijing:China Planning Press,2013.
[7]真空镀膜溅铝问题分析[EB/OL].(2015-08-03)[2020-10-02]http://www.libipc.com/news_4.htm.Analysis on splash during vacuum aluminum plating[EB/OL].(2015-08-03)[2020-10-02]http://www.libipc.com/news_4.htm.
[8]关于真空镀铝时出现的铝层发黄的问题[EB/OL].(2013-10-29)[2020-10-02]http://china.chemnet.com/tech/detail.php?id=20136.On yellowing problem of vacuum-plated aluminum coating[EB/OL].(2013-10-29)[2020-10-02]http://china.chemnet.com/tech/detail.php?id=20136.
[9]车灯饰圈用免底涂PBT材料[EB/OL].(2017-03-21)[2020-10-02]http://www.docin.com/p-1873035107.html.Primer-free PBT material for decorative ring of vehicle lamp[EB/OL].(2017-03-21)[2020-10-02]http://www.docin.com/p-1873035107.html.
[10]陶永亮.灯具注塑件真空镀膜附着力等检查方法[J].塑料制造,2011(4):93-97.TAO Y L.Methods for inspecting adhesion strength and other properties of vacuum-plated coatings on injection-molded parts of lamps[J].Plastics Manufacture,2011(4):93-97.
[11]张继东,李才巨,朱心昆,等.不同基体真空蒸镀铝膜的附着力研究[J].昆明理工大学学报(理工版),2006,31(6):25-27.ZHANG J D,LI C J,ZHU X K,et al.Study on the adhesive power of aluminum film on different substrates prepared by vacuum evaporation[J].Journal of Kunming University of Science and Technology (Science and Technology),2006,31(6):25-27.
基本信息:
DOI：10.19289/j.1004-227x.2021.02.003
中图分类号:U463.65
引用信息:
[1]陶永亮.车灯塑料件真空镀铝缺陷分析与对策[J].电镀与涂饰,2021,40(02):96-101.DOI:10.19289/j.1004-227x.2021.02.003.
2021-01-30
2021-01-30