| 105 | 0 | 141 |
| 下载次数 | 被引频次 | 阅读次数 |
[目的]舱体内双组分轻质有机硅隔热涂料TR-37的自动喷涂状态及涂层厚度均匀性有待提高。[方法]探讨了喷涂黏度、喷涂间隔和喷涂扇幅对喷涂状态和涂层厚度的影响。采用舱段模拟件进行了自动喷涂厚度均匀性验证，并分析了表面凹凸不平、局部涂层厚度超差、边缘区域存在喷涂阴影等缺陷的改进措施。[结果]当涂料喷涂黏度为26～28 s，喷涂间隔为30 min，喷涂扇幅为100～150 mm时，可保证优良的喷涂状态及涂层外观品质。[结论]本研究为持续提升内隔热层喷涂效率及涂层外观品质提供了参考。
Abstract：[Introduction] The automatic spraying process and coating thickness uniformity of TR-37 two-component lightweight silicone thermal insulation paint need to be improved. [Method] The effects of paint viscosity, spray interval, and spray fan width on paint spraying status and coating thickness were discussed. The uniformity of coating thickness by automatic spraying was verified with simulated cabin parts. The countermeasures for some defects such as rough coating surface, over-thick coating locally, and spray shadow at edges were analyzed. [Result] Good spraying and coating quality can be guaranteed under the following conditions: paint viscosity 26-28 seconds, spray interval 30 minutes, and spray fan width 100-150 mm. [Conclusion] This study provides a reference for continuously improving the spraying efficiency of inner insulation layer and the appearance quality of coating.
[1]谢永旺,夏雨,许学伟,等.航天飞行器热防护系统研究概况及其发展趋势[J].空天技术, 2022(4):73-86.XIE Y W, XIA Y, XU X W, et al. Research status of thermal protection system for spacecraft and its development trend[J]. Aerospace Technology,2022(4):73-86.
[2]周尧,吴波,汪杨,等.隔热材料在航空电子设备中的应用[J].物联网技术, 2021, 11(11):108-109.ZHOU Y, WU B, WANG Y, et al. The application of insulation materials in aviation electronic equipment[J]. Internet of Things Technologies, 2021,11(11):108-109.
[3]邢亚娟,孙波,高坤,等.航天飞行器热防护系统及防热材料研究现状[J].宇航材料工艺, 2018, 48(4):9-15.XING Y J, SUN B, GAO K, et al. Research status of thermal protection system and thermal protection materials for aerospace vehicles[J]. Aerospace Materials&Technology, 2018, 48(4):9-15.
[4]肖军,程功,赵融,等.一种机载导弹舱内隔热层快速成型技术[J].航空兵器, 2018(3):83-87.XIAO J, CHENG G, ZHAO R, et al. Rapid forming technology of heat insulation coating on inner-wall for airborne missiles[J]. Aero Weaponry, 2018(3):83-87.
[5]王雪琴,俞建勇,丁彬.纳米纤维隔热材料在航空航天领域的应用进展[J].纺织导报, 2018(增刊1):68-72.WANG X Q, YU J Y, DING B. Progress of nanofibrous materials for thermal insulation applied in aerospace[J]. China Textile Leader, 2018(Suppl.1):68-72.
[6]柳凤琦,王鲁凯,门静,等.气凝胶隔热材料制备及航天热防护应用研究进展[J].宇航材料工艺, 2022, 52(2):26-47.LIU F Q, WAGN L K, MEN J, et al. Progress on the preparation of aerogel thermal insulations and their applications in aerospace thermal protection system[J]. Aerospace Materials&Technology, 2022, 52(2):26-47.
[7]范海波,韩志昌,赵立波,等.双组分硅橡胶防热涂料自动喷涂工艺研究[J].涂料工业, 2020, 50(1):57-62, 68.FAN H B, HAN Z C, ZHAO L B, et al. Study on automatic spraying technology of two-component silicone rubber heat resistant coatings[J]. Paint&Coatings Industry, 2020, 50(1):57-62, 68.
基本信息:
DOI：10.19289/j.1004-227x.2024.02.018
中图分类号:TQ639;V26;V46
引用信息:
[1]党文伟,李晓升,李鲲,等.舱体内隔热层自动喷涂技术的改进[J].电镀与涂饰,2024,43(02):143-148.DOI:10.19289/j.1004-227x.2024.02.018.